PSIG'den PSIA'ya Logo
PSIG'den PSIA'ya
Engineering • By Shahab Dev

PSIG Explained: What PSIG Means, and Can PSIG Be Negative?

PSIG means pounds per square inch gauge, pressure above the surrounding air. Yes, psig can be negative. A negative psig reading means pressure below atmosphere, a partial vacuum. Learn the floor of minus 14.7 psig, worked examples, and why psia can never be negative.

psig explained chart showing minus 5 psig equals 9.7 psia and minus 14.7 psig equals 0 psia

PSIG means pounds per square inch gauge, pressure above the surrounding air. Yes, psig can be negative, down to minus 14.7 psig at sea level.

PSIG is the gauge reading, not the total pressure. Zero psig is not zero pressure, it is atmospheric pressure, the pressure of the air around us. A positive psig reading means the pressure is above the surrounding air, and a negative psig reading means the pressure is below the surrounding air, which is a partial vacuum. Minus 5 psig means the pressure is 5 psi below atmosphere. For instant results on any value, use our free PSIG to PSIA calculator on the home page.

What Negative PSIG Means

PSIG measures pressure relative to the surrounding air. Zero psig is not zero pressure, it is atmospheric pressure, the pressure of the air around us. A positive psig reading means the pressure is above the surrounding air. A negative psig reading means the pressure is below the surrounding air.

Think of it as a balance. The gauge reads zero when the pressure inside matches the air outside. Pump air in, and the gauge reads positive. Pull air out, and the gauge reads negative. The reading is a difference from atmosphere, so it can go either way.

The floor is set by the vacuum. You cannot pull out more air than there is. At sea level, the surrounding air exerts 14.7 psi, so the lowest possible psig reading is minus 14.7 psig. That is 0 psia, a perfect vacuum, with no air left to remove.

The Formula: Same Addition, Negative Input

The conversion is the same for negative values as for positive ones. Add the atmospheric pressure to the gauge reading.

$$ \text{PSIA} = \text{PSIG} + 14.7 $$

Apply it to minus 5 psig:

$$ \text{PSIA} = -5 + 14.7 = 9.7 \text{ psia} $$

Apply it to the floor, minus 14.7 psig:

$$ \text{PSIA} = -14.7 + 14.7 = 0 \text{ psia} $$

There is no mystery in the maths. The formula does not change, only the sign of the input changes.

Table: Negative PSIG in PSIA and Vacuum

Every value in this table uses sea level atmospheric pressure of 14.7 psi. Vacuum in inches of mercury uses 1 psi equals 2.036 inHg.

PSIGPSIAVacuum (inHg)
0 psig14.7 psia0 inHg
-1 psig13.7 psia2.04 inHg
-2 psig12.7 psia4.07 inHg
-5 psig9.7 psia10.18 inHg
-7.5 psig7.2 psia15.27 inHg
-10 psig4.7 psia20.36 inHg
-12 psig2.7 psia24.43 inHg
-14.7 psig0 psia29.93 inHg

Every row follows the same rule. For example, minus 10 psig plus 14.7 equals 4.7 psia, and 10 times 2.036 equals 20.36 inHg of vacuum.

Worked Examples

Example 1: Convert minus 5 psig to psia

$$ \text{PSIA} = -5 + 14.7 = 9.7 \text{ psia} $$

Answer: minus 5 psig equals 9.7 psia at sea level. The pressure is 5 psi below atmosphere, so about two thirds of the air is still there.

Example 2: Convert minus 10 psig to psia

$$ \text{PSIA} = -10 + 14.7 = 4.7 \text{ psia} $$

Answer: minus 10 psig equals 4.7 psia at sea level. That is about one third of atmospheric pressure, a strong vacuum for most workshop uses.

Example 3: Convert minus 14.7 psig to psia

$$ \text{PSIA} = -14.7 + 14.7 = 0 \text{ psia} $$

Answer: minus 14.7 psig equals 0 psia, a perfect vacuum. No real pump reaches this, because a perfect vacuum needs every molecule of air removed.

Example 4: Convert 9.7 psia back to psig

$$ \text{PSIG} = 9.7 - 14.7 = -5 \text{ psig} $$

Answer: 9.7 psia equals minus 5 psig at sea level. The reverse works the same way, subtract 14.7 from the absolute value.

Why PSIA Can Never Be Negative

PSIA measures pressure above a perfect vacuum. Zero psia is a perfect vacuum, with no air at all. There is no pressure below no air, so psia stops at zero and cannot go negative.

This is the common point of confusion. People see a negative psig reading and ask whether the absolute pressure is negative too. It is not. A negative psig reading of minus 5 is still a positive absolute pressure of 9.7 psia. The minus sign only says the pressure is below atmosphere, not below zero.

The same idea applies at altitude. At 1,500 metres above sea level, atmospheric pressure is about 12.3 psi, so the floor there is minus 12.3 psig, which is still 0 psia. The floor changes with altitude because the atmosphere changes, but the absolute floor is always 0 psia.

Where Negative PSIG Readings Appear

Vacuum pumps and vacuum chambers

A vacuum pump pulls air out of a chamber, so the gauge reads negative. A roughing pump for a vacuum chamber may reach minus 14 psig or lower, close to the floor. A workshop vacuum pump for HVAC work usually reaches about minus 12 psig, which is about 2.7 psia.

Compound gauges

A compound gauge shows both positive pressure and vacuum on one dial. The left side of the dial reads vacuum in negative psig or inches of mercury, and the right side reads positive pressure in psig. HVAC service gauges are usually compound gauges, because a refrigeration system is pulled into vacuum before it is charged.

Suction lines and vacuum packaging

A suction line that pulls liquid or air into a pump can show a negative reading if the suction is strong. Vacuum packaging machines pull air out of a bag, so the gauge reads negative while the pump runs. A reading of minus 10 psig in a packaging machine means the bag holds about 4.7 psia of air, about one third of normal pressure.

How to Read a Compound Gauge

A compound gauge has two scales. The vacuum side is usually marked in inches of mercury, from 0 to 30 inHg, and the pressure side is marked in psig. To convert a vacuum reading in inHg to psig, divide by 2.036 and make it negative. For example, 20.36 inHg of vacuum divided by 2.036 equals 10, so the reading is minus 10 psig, which is 4.7 psia.

For the full vacuum conversion, see our guide on vacuum pressure inHg to psig and psia. For the general difference between the two units, see PSIG vs PSIA difference explained.

Frequently Asked Questions

What does psig mean?

PSIG means pounds per square inch gauge. It measures pressure above the surrounding air, so zero psig is atmospheric pressure, not zero pressure.

Can psig be negative?

Yes. A negative psig reading means the pressure is below the surrounding air, which is a partial vacuum. At sea level, psig can go down to minus 14.7 psig, which is a perfect vacuum.

What does minus 5 psig mean?

Minus 5 psig means the pressure is 5 psi below the surrounding air. At sea level, that is 9.7 psia, because minus 5 plus 14.7 equals 9.7.

What is the lowest possible psig value?

Minus 14.7 psig at sea level, which is 0 psia, a perfect vacuum. There is no pressure below a perfect vacuum, so psig cannot go lower than minus the local atmospheric pressure.

Can psia be negative?

No. Psia measures pressure above a perfect vacuum, and 0 psia is a perfect vacuum. There is no pressure below that, so psia can never be negative.

Where do negative psig readings appear?

On vacuum pumps, vacuum chambers, compound gauges, and suction lines. Any system that pulls air out below atmospheric pressure shows a negative psig reading.

How do I convert a negative psig value to psia?

Add 14.7 at sea level, the same as for a positive value. Minus 10 psig plus 14.7 equals 4.7 psia.

Frequently asked questions

What does psig mean?

PSIG means pounds per square inch gauge. It measures pressure above the surrounding air, so zero psig is atmospheric pressure, not zero pressure.

Can psig be negative?

Yes. A negative psig reading means the pressure is below the surrounding air, which is a partial vacuum. At sea level, psig can go down to minus 14.7 psig, which is a perfect vacuum.

What does minus 5 psig mean?

Minus 5 psig means the pressure is 5 psi below the surrounding air. At sea level, that is 9.7 psia, because minus 5 plus 14.7 equals 9.7.

What is the lowest possible psig value?

Minus 14.7 psig at sea level, which is 0 psia, a perfect vacuum. There is no pressure below a perfect vacuum, so psig cannot go lower than minus the local atmospheric pressure.

Can psia be negative?

No. Psia measures pressure above a perfect vacuum, and 0 psia is a perfect vacuum. There is no pressure below that, so psia can never be negative.

Where do negative psig readings appear?

On vacuum pumps, vacuum chambers, compound gauges, and suction lines. Any system that pulls air out below atmospheric pressure shows a negative psig reading.

How do I convert a negative psig value to psia?

Add 14.7 at sea level, the same as for a positive value. Minus 10 psig plus 14.7 equals 4.7 psia.